1864 Scotland

The Scottish physicist examined Faraday’s ideas concerning the link between electricity and magnetism interpreted in terms of fields of force and saw that they were alternative expressions of the same phenomena. Maxwell took the experimental discoveries of Faraday in the field of electromagnetism and provided his unified mathematical explanation, which outlined the relationship between magnetic and electric fields. He then proved this by producing intersecting magnetic and electric waves from a straightforward oscillating electric current.

‘Four equations that express mathematically the way electric or magnetic fields behave’

In 1831 – following the demonstration by HANS CHRISTIAN OERSTED that passing an electric current through a wire produced a magnetic field around the wire, thereby causing a nearby compass needle to be deflected from north – MICHAEL FARADAY had shown that when a wire moves within the field of a magnet, it causes an electric current to flow along the wire.
This is known as electromagnetic induction.

In 1864 Maxwell published his ‘Dynamical Theory of the Electric Field’, which offered a unifying, mathematical explanation for electromagnetism.

In 1873 he published ‘Treatise on Electricity and Magnetism’.

The equations are complex, but in general terms they describe:

  • a general relationship between electric field and electric charge
  • a general relationship between magnetic field and magnetic poles
  • how a changing magnetic field produces electric current
  • how an electric current or a changing electric field produces a magnetic field

The equations predict the existence of electromagnetic waves, which travel at the speed of light and consist of electric and magnetic fields vibrating in harmony in directions at right angles to each other. The equations also show that light is related to electricity and magnetism.

Maxwell worked out that the speed of these waves would be similar to the speed of light and concluded, as Faraday had hinted, that normal visible light was a form of electromagnetic radiation. He argued that infrared and ultraviolet light were also forms of electromagnetic radiation, and predicted the existence of other types of wave – outside the ranges known at that time – which would be similarly explainable.

Verification came with the discovery of radio waves in 1888 by HEINRICH RUDOLPH HERTZ. Further confirmation of Maxwell’s theory followed with the discovery of X-rays in 1895.

photo portrait of JAMES CLERK MAXWELL ©


Maxwell undertook important work in thermodynamics. Building on the idea proposed by JAMES JOULE, that heat is a consequence of the movement of molecules in a gas, Maxwell suggested that the speed of these particles would vary greatly due to their collisions with other molecules.

In 1855 as an undergraduate at Cambridge, Maxwell had shown that the rings of Saturn could not be either liquid or solid. Their stability meant that they were made up of many small particles interacting with one another.

In 1859 Maxwell applied this statistical reasoning to the general analysis of molecules in a gas. He produced a statistical model based on the probable distribution of molecules at any given moment, now known as the Maxwell-Boltzmann kinetic theory of gases.
He asked what sort of motion you would expect the molecules to have as they moved around inside their container, colliding with one another and the walls. A reasonably sized vessel, under normal pressure and temperature, contains billions and billions of molecules. Maxwell said the speed of any single molecule is always changing because it is colliding all the time with other molecules. Thus the meaningful quantities are molecular average speed and the distribution about the average. Considering a vessel containing several different types of gas, Maxwell realized there is a sharp peak in the plot of the number of molecules versus their speeds. That is, most of the molecules have speeds within a small range of some particular value. The average value of the speed varies from one kind of molecule to another, but the average value of the kinetic energy, one half the molecular mass times the square of the speed, (1/2 mv2), is almost exactly the same for all molecules. Temperature is also the same for all gases in a vessel in thermal equilibrium. Assuming that temperature is a measure of the average kinetic energy of the molecules, then absolute zero is absolute rest for all molecules.

The Joule-Thomson effect, in which a gas under high pressure cools its surroundings by escaping through a nozzle into a lower pressure environment, is caused by the expanding gas doing work and losing energy, thereby lowering its temperature and drawing heat from its immediate neighbourhood. By contrast, during expansion into an adjacent vacuüm, no energy is lost and temperature is unchanged.

The explanation that heat in gas is the movement of molecules dispensed with the idea of the CALORIC fluid theory of heat.

The first law of thermodynamics states that the heat in a container is the sum of all the molecular kinetic energies.
Thermal energy is another way of describing motion energy, a summing of the very small mechanical kinetic energies of a very large number of molecules; energy neither appears nor disappears.
According to BOYLE’s, CHARLES’s and GAY-LUSSAC’s laws, molecules beating against the container walls cause pressure; the higher the temperature, the faster they move and the greater the pressure. This also explains Gay-Lussac’s experiment. Removing the divider separating half a container full of gas from the other, evacuated, half allows the molecules to spread over the whole container, but their average speed does not change. The temperature remains the same because temperature is the average molecular kinetic energy, not the concentration of caloric fluid.

In 1871 Maxwell became the first Professor of Physics at the Cavendish Laboratory. He died at age 48.

Wikipedia-logo © (link to wikipedia)



<< top of page



1843 – England

‘A given amount of work produces a specific amount of heat’

4.18 joules of work is equivalent to one calorie of heat.

In 1798 COUNT RUMFORD suggested that mechanical work could be converted into heat. This idea was pursued by Joule who conducted thousands of experiments to determine how much heat could be obtained from a given amount of work.

Even in the nineteenth century, scientists did not fully understand the properties of heat. The common belief held that it was some form of transient fluid – retained and released by matter – called CALORIC. Gradually, the idea that it was another form of energy, expressed as the movement of molecules gained ground.
Heat is now regarded as a mode of transfer of energy – the transfer of energy by virtue of a temperature difference. Heat is the name of a process, not that of an entity.

Joule began his experiments by examining the relationship between electric current and resistance in the wire through which it passed, in terms of the amount of heat given off. This led to the formulation of Joule’s ideas in the 1840s, which mathematically determined the link.

Joule is remembered for his description of the conversion of electrical energy into heat; which states that the heat (Q) produced when an electric current (I) flows through a resistance (R) for a time (t) is given by Q=I2Rt

Its importance was that it undermined the concept of ‘caloric’ as it effectively determined that one form of energy was transforming itself into another – electrical energy to heat energy. Joule proved that heat could be produced from many different types of energy, including mechanical energy.

john collier portrait of james prescott joule


Joule's apparatus to show equivalence of work and heat

Joule’s apparatus to show equivalence of work and heat

Joule was the son of a brewer and all his experiments on the mechanical equivalent of heat depended upon his ability to measure extremely slight increases in temperature, using the sensitive thermometers available to him at the brewery. He formulated a value for the work required to produce a unit of heat. Performing an improved version of Count Rumford’s experiment, he used weights on a pulley to turn a paddle wheel immersed in water. The friction between the water and the paddle wheel caused the temperature of the water to rise slightly. The amount of work could be measured from the weights and the distance they fell, the heat produced could be measured by the rise in temperature.

Joule went on to study the role of heat and movement in gases and subsequently with WILLIAM THOMSON, who later became Lord Kelvin, described what became known as the ‘Joule-Thomson effect’ (1852-9). This demonstrated how most gases lose temperature on expansion due to work being done in pulling the molecules apart.

Thomson thought, as CARNOT had, that heat IN equals heat OUT during a steam engine’s cycle. Joule convinced him he was wrong.

The essential correctness of Carnot’s insight is that the work performed in a cycle divided by heat input depends only on the temperature of the source and that of the sink.

Synthesising Joule’s results with Carnot’s ideas, it became clear that a generic steam engine’s efficiency – work output divided by heat input – differed from one (100%) by an amount that could be expressed either as heat OUT at the sink divided by heat IN at the source, or alternatively as temperature of the sink divided by temperature of the source. Carnot’s insight that the efficiency of the engine depends on the temperature difference was correct. Temperature has to be measured using the right scale. The correct one had been hinted at by DALTON and GAY-LUSSAC’s experiments, in which true zero was minus 273degrees Celsius.

A perfect cyclical heat engine with a source at 100degrees Celsius and a sink at 7degrees has an efficiency of 1 – 280/373. The only way for the efficiency to equal 100% – for the machine to be a perfect transformer of heat into mechanical energy – is for the sink to be at absolute zero temperature.

Joule’s work helped in determining the first law of thermodynamics; the principle of the conservation of energy. This was a natural extension of his work on the ability of energy to transform from one type to another.

Joule contended that the natural world has a fixed amount of energy which is never added to nor destroyed, but which just changes form.

The SI unit of work and energy is named the joule (J).

link to James Joule - Manchester Museum of Science & Industry

Manchester Museum of Science & Industry

Wikipedia-logo © (link to wikipedia)



Related articles

<< top of page